Selby to Goole Line

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Selby to Goole Line
Selby (Leeds & Selby Rly)
Thorpe Gates Junction
Selby Canal
former ECML to Selby
1 Brayton East Junction
3 Barlow
Drax power station (post 1970)
Connecting chord post 1970s
Hull and Barnsley Railway
5 Drax Hales
River Aire
8 Airmyn and Rawcliffe
Oakhills Junction
Goole via former L&YR track
Distances in miles from Selby

The Selby to Goole Line was a standard gauge branchline connecting Selby and Goole built in 1910 by the North Eastern Railway.[1] The line closed in the 1960s as part of the Beeching cuts.[2]

History

A line connecting Goole to the rail network via Selby (Brayton) was put before parliament in 1845 ("Brayton and Goole Railway"), proposed by George Hudson and the York and North Midland Railway (Y&NMR}; the line was rejected and another rival scheme, the Wakefield, Pontefract and Goole Railway (later part of the L&YR) was accepted by parliament in the same year, becoming Goole's first rail link.[3][4]

At the time of the branch's construction Goole was served by the Lancashire and Yorkshire Railway (L&YR), Selby by the North Eastern Railway, and Drax by the Hull and Barnsley Railway. However a bottleneck at the two-track Selby swing bridge on the already busy East Coast Main Line from London to Scotland meant that freight trains were often delayed, the building of the line was therefore desirable since it offered another path to the port of Hull via Goole for the coal and other freight that was exported via the port at that time.[5]

Construction of the railway began in 1907, with Baldry & Yerburgh chosen as contractors, and A.C. Mitchell and W.J. Cudworth acting as the NER's engineers. The line was built as a doubled tracked railway, with much of it being built on embankments.[5]

Freight traffic did not meet expectations and the line was reduced to single track after 1923. The line was closed in 1964.[6][note 1]

Route

The line can be considered to begin at Thorpe Gates Junction Signal box; where the new line branches off to the right from the line of the former Leeds and Selby Railway when approaching from the west towards Selby, it then crossed over the former East Coast Main Line by an overhead bridge. A branch from Selby then met the line from the north; somewhere east of Brayton.[5]

Three intermediate stations were served Barlow station, Drax Hales station,[note 2] and Airmyn and Rawcliffe station.

The line reached Goole via a junction onto the 1910 diversion of the original L&YR line. The Selby and Goole joined at Oakhill junction and then ran on the line, where it joined the NER's "Loop line" section of the Hull and Doncaster branch (1869) at Potter's Grange junction just west of Goole station.[7][8]

Rolling stock

Initially passenger services railway was operated with steam railcars consisting of tank engine and carriage couple, the engine being designed by Edward Fletcher,[5] later LNER Class G5s were used.[2] Later Sentinel railcars were used, and Diesel multiple units operated the line before closure.[6]

The line following closure

Northwest of the crossing with the Hull and Barnsley Railway only parts of the embanked trackbed remain, the bridges and track having been removed. The line to Barlow continued to be used to the WD depot and was extended 0.5 miles (0.80 km) in October 1966 to provide connection to Drax Power Station when it was being built.[9] That section became Barlow Common nature reserve in 1986.[10] The crossing with the Hull and Barnsley now forms the southern perimeter of Drax Power Station, which is fed from the H&BR. Southeast of the crossing little remains – the route of the line is now mostly replaced by the A645 road.

In popular culture

The line is one of the examples of the Beeching Axe mentioned in the Flanders and Swann song "The Slow Train".

Notes

  1. The track from Brayton junction as far as Barlow station remained open, serving a railway tip, and later being used for training track maintenance vehicle operators. Source Railway Memories No. 14 Selby and Goole. Stephen Chapman
  2. The village of Drax now having two stations until 1923 with Drax Abbey railway station

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 5.2 5.3 Lua error in package.lua at line 80: module 'strict' not found.
  6. 6.0 6.1 Lua error in package.lua at line 80: module 'strict' not found.
  7. Hoole 1986, p. 41.
  8. Ordnance Survey Sheets 237SE, 252NE
  9. Modern Railways October 1966 p. 521
  10. Selby Council Barlow Common nature reserve history

Sources

    • Lua error in package.lua at line 80: module 'strict' not found.

Further information

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.

Route locations

  • Lua error in package.lua at line 80: module 'strict' not found., Thorpes Gates junction
  • Lua error in package.lua at line 80: module 'strict' not found., bridge over Selby Canal
  • Lua error in package.lua at line 80: module 'strict' not found., crossing point with the former East Coast Main Line route
  • Lua error in package.lua at line 80: module 'strict' not found., Brayton east junction
  • Lua error in package.lua at line 80: module 'strict' not found., Barlow station and road crossing
  • Lua error in package.lua at line 80: module 'strict' not found., Crossing of the H&BR and the Selby-Goole line; The freight line supplying Drax power station curves to the north-west onto the former route of the Goole-Selby
  • Lua error in package.lua at line 80: module 'strict' not found., Drax Hales station
  • Lua error in package.lua at line 80: module 'strict' not found., River Aire crossing
  • Lua error in package.lua at line 80: module 'strict' not found., Airmyn/Airmyn and Rawcliffe station
  • Lua error in package.lua at line 80: module 'strict' not found., Oakhill junction with former LY&R

External links