Edinburgh Tram (vehicle)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Edinburgh Tram
Edinburgh trams first day of operation 05.JPG
An Edinburgh Tram on the first day of operation, May 2014.
In service May 2014
Manufacturer CAF
Built at Beasain, Spain
Family name Urbos 3
Constructed 2009–2011
Number built 27
Number in service 27
Formation 7 articulated cars per tram
Fleet numbers 251 - 277
Capacity 250 (78 seated, 170 standing, 2 wheelchairs)[1]
Operator(s) Transport for Edinburgh
Depot(s) Gogar Depot
Specifications
Car body construction Stainless steel[2]
Car length 42.8 m (140 ft 5 in)[2]
Width 2.65 m (8 ft 8 in)[2]
Height 3.4 m (11 ft 2 in)
Maximum speed Lua error in Module:Convert at line 1851: attempt to index local 'en_value' (a nil value).[2]
Weight 56 tonnes (55 long tons; 62 short tons)[2]
Traction system Twelve 80 kW (110 hp) traction motors
Electric system(s) 750 V DC OHLE
Current collection method Pantograph
Track gauge 1,435 mm (4 ft 8 12 in) Standard gauge

The Edinburgh Tram is a fleet of 27 low-floor trams built by CAF of Beasain, in the Basque country of Spain between 2009 and 2011 for use on the Edinburgh Tram line in Edinburgh, Scotland.

History

The contract to build a fleet of 27 trams for the Phase 1a (currently on hold) and Phase 1b tram lines[3] was awarded to the Spanish rail equipment manufacturer CAF in November 2007[4] and is worth up to £40 million. The trams are built to meet the highly bespoke specifications issued by Transport Initiatives Edinburgh (TIE), which precluded the use of an existing design.

CAF was selected by competitive tender from a list of four rail vehicle manufacturers, the others being Alstom, Bombardier, and Siemens.[5]

A full size mockup of the front of the proposed tram was constructed and put on display on Princes Street for the public to view.[6] The replica tram was moved to Constitution Street at the foot of Leith Walk in April 2009.[7][8] There was also a tram front mockup put on display at the Gyle Shopping centre next to the bus stop.

The first finished tram was delivered on 26 April 2010 and went on public display on 28 April 2010 at the location of the previous mockup in Princes Street,[2] before being moved to open storage in Broxburn in November 2010.[9] The tram arrived far in advance of the completion of infrastructure (including its home depot), which has suffered serious delays and cost over-runs. The tramway opened on 31 May 2014.[10]

Specifications

The Edinburgh trams are bi-directional, 42.8 metres (140 ft) long[1][11] and built with 100% low-floor access to meet UK Rail Vehicle Access Regulations for disabled people. Passenger capacity is 250 – 78 seated, 170 standing and 2 wheelchair spaces[1] – and the trams will be fitted with CCTV.[12]

Several special requirements were specified for the tram vehicles: they have to cope with the steep slopes of Edinburgh streets, operate with low noise and offer a visual fit suitable for a World Heritage Site. The particular requirements were specified by TFE with the aim of designing an advanced tram system tailored for the needs of Edinburgh.[5] To achieve the low noise requirement a self lubricating system is used to avoid the squeal of wheels on track when turning tight corners.

Livery

To create a visual continuity between the tram fleets and local bus services, Edinburgh trams have the same livery as that of Lothian Buses. The tram mockup shown in 2009 was decorated with the red and gold "harlequin" design that was introduced on Lothian Buses in the 1990s. Following the announcement of a rebranding of the bus fleet in April 2010, Lothian Buses reintroduced their traditional madder and white livery, and the tram livery was updated to a matching colour scheme.[13]

Testing

The first part of the tram line to be completed was a short section between Gogarburn and the depot at Gogar. Testing of new trams on this stretch of track started in December 2011 - the first time that a tram had moved under electric power in Edinburgh since 1956.[14] The first daytime test run of a tram along the full route from Edinburgh Airport to York Place took place on 20 February 2014.[15]

In service

The fleet of 27 was ordered before the proposed network was curtailed. An attempt in 2011 to lease ten trams to Transport for London for use on Tramlink was unsuccessful and thus Edinburgh Trams took delivery of all 27 even though only half are required to operate the network at its peak.[16]

References

  1. 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 2.2 2.3 2.4 2.5 Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Today's Railways Issue 86
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.
  14. http://www.edinburghtrams.com/include/uploads/local_update/Gogar_leaflet_final_web.pdf
  15. http://www.edinburghtrams.com/news/a-trams-eye-view
  16. Edinburgh's trams are on track for Croydon The Herald 26 March 2011

External links