Ascot-Pullin 500
| 220px | |
| Manufacturer | Ascot-Pullin Motorcycles |
|---|---|
| Production | 1928 |
| Predecessor | Pullin-Groom |
| Engine | 496 cc (30.3 cu in) air-cooled OHV single |
| Top speed | 70 mph (110 km/h)[1] |
| Power | 17 bhp (13 kW)[1] |
| Transmission | Three speed chain final drive |
| Suspension | Pressed steel girder front, rigid rear |
| Brakes | Drum front and rear |
| Weight | 330 lb (150 kg)[citation needed] (dry) |
The Ascot-Pullin 500 was a motorcycle made by Ascot-Pullin Motorcycles in Letchworth, Hertfordshire in 1928. As an unpdate version of the Pullin motor bicycle of 1919,[2] the Ascot-Pullin 500 overhead valve single was the first time hydraulic brakes were used on a motorcycle.[3]
History
In 1919, British inventor Cyril Pullin and Stanley L. Groom produced the Pullin motor bicycle,[2] a wheeled machine that included a novel two-stroke engine and extensive manufacture use of steel pressings that anticipated developments by British motorcycle manufacturer Ariel Motorcycles in the late 1950s and Japanese motorcycle manufacturers in 1960s.[2] The bicycle was patented in 1920.[2] Since 1920, Pullin had been working with Stanley Groom to develop and patent a two-stroke motorcycle with a unique design of pressed sheet metal frame and forks. After working on a range of other inventions including the Ascot car, Pullin teamed up with Groom again to further develop their ideas and patent the Ascot Pullin motorcycle, with a four-stroke rather than two-cycle engine.[4] At a time when manufacturers were taking a very traditional approach to motorcycle design with conventional frames and engine layout, Pullin and Grom were keen to create an enclosed feel by mounting the engine horizontally within a pressed-steel frame. As well as the hydraulic brakes, Pullin also designed a telescopic centre stand and an adjustable windshield, complete with a windscreen wiper and rear-view mirror, as well as a fully enclosed chain and interchangeable wheels.[1]
With estimated 17 bhp (13 kW), the Ascot-Pullin was capable of 70 mph (110 km/h), but less than 500 were produced so few survive to this day.[1]
Pullin's influence can be seen in the emergence of the Ariel Leader and the Vincent Black Prince thirty years later, which both developed the enclosed concept in an attempt to attract a wider range of customers. As with the Ascot-Pullin, however, the fully enclosed look has never really led to high volume sales but instead attracts a niche market.
At present, the U.S. National Highway Traffic Safety Administration recognizes that the first hydraulic brakes on motorcycles occurred in 1952.[5]
References
- ↑ 1.0 1.1 1.2 1.3 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 2.0 2.1 2.2 2.3 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
